Do you currently have the and correct COM port drivers installed?
Configuring CTCSS, DCS, 2-Tone, 5-Tone, and DTMF for private calling.
If your cable uses a Prolific or FTDI chip, you must install the corresponding virtual COM port (VCP) driver so your computer can recognize the cable.
: Configures up to 256 channels (or 128 depending on the specific model) with dedicated channel spacing of 12.5kHz or 25kHz.
Input frequencies and tone settings (CTCSS/DCS). kirisun pt8100 programming software
Software version does not match the frequency band of the radio (VHF vs UHF).
per channel, allowing for complex scanning lists in large workgroups. Essential Hardware & Setup To use the software, you need the following hardware: Programming Cable
Comprehensive Guide to Kirisun PT8100 Programming Software: Setup, Features, and Usage
The KSP8100 software is specifically designed by Kirisun for the PT8100 series. With it, you can read the radio's current configuration (like serial number and software version), set frequency ranges and power levels, program signaling codes (CTCSS/DCS), and customize every programmable button. Do you currently have the and correct COM
The software is incredibly lightweight, usually requiring only a few megabytes of storage.
Connect the programming cable to your computer and the front microphone port of the PT8100. Turn the radio power switch on.
: After connecting, users must identify the correct COM port in the computer's Device Manager and select it within the software settings. Radio Data Transfer
What (e.g., Windows 10, Windows 11) you are running. : Configures up to 256 channels (or 128
The Kirisun PT8100 programming software is essential for tailoring the radio to your operational needs. By following the steps above, you can efficiently manage channels, emergency features, and signaling, ensuring your fleet remains connected. Always backup your radio's original data before making modifications.
You will see a tabbed interface. Focus on the "Channel Information" or "Conventional Channel" table.
Verify your radio sticker model (e.g., PT8100-01 vs PT8100-02) and open a codeplug designed for that specific band.
