Makerbase Mks Dlc V21 Manual Link -
Using the manual, verify these five points:
Use the dedicated 3-pin or 2-pin laser control ports to manage laser power dynamically via software.
Whether you are building a new laser or upgrading an old one, finding the correct documentation is crucial. This article provides the necessary , wiring guides, and firmware instructions to get your machine running efficiently. 1. MKS DLC V2.1 Manual and Technical Resources makerbase mks dlc v21 manual link
| Resource | Direct Link / Location | Description | | :--- | :--- | :--- | | | MKS-DLC GitHub Wiki | The primary manual for the original MKS DLC board, providing foundational information. | | DLC32 Wiring Manual | PDF Download | The most essential document for proper hardware setup; details all connections and pinouts for the MKS DLC32 V2.1. | | Firmware Programming Instructions | PDF Download | A step-by-step guide to updating the board's firmware using the official MKS tools. | | MKS-DLC32 GitHub Repository | github.com/makerbase-mks/MKS-DLC32 | The central hub for source code, firmware releases, and the official wiki for the board. | | Makerbase Manuals (Multi-Language) | manuals.plus/category/mks | A handy portal for browsing manuals for various MKS products in Portuguese, Spanish, Turkish, and Chinese. |
If a yellow warning icon appears under "Ports (COM & LPT)", download and install the CH340 driver. Note the allocated COM port number (e.g., COM3). Step 2: Choose Control Software The board interfaces with any GRBL-compatible software: Using the manual, verify these five points: Use
[stepper_x] step_pin: PE2 dir_pin: PE4 enable_pin: !PE3 microsteps: 16 rotation_distance: 40
Connect the laser GND to the Laser connector GND pin. | | Firmware Programming Instructions | PDF Download
Outputs the main input voltage to power the laser module directly.
Understanding the hardware limits of your MKS DLC V2.1 prevents accidental damage to the board during installation.