A: For standard charging, up to 120Ah (ampere-hour). For maintenance mode, any size up to 200Ah. Charging a larger battery will just take longer; the BX60 will not overheat.
To keep your BX60 functioning for decades to come, follow this simple maintenance routine:
Set the voltage toggle switch (6V or 12V) based on your battery type.
Here are some of the key specifications of the Bradex BX60 battery charger: bradex bx60 battery charger manual
: Ensure the area is well-ventilated to prevent the buildup of flammable gases released during charging. Connection : Connect the Red (+) clip to the positive battery terminal.
| Parameter | Value | |--------------------|---------------------------| | Input | 110–240V AC, 50/60Hz | | Output Voltage | 12V (14.4V / 14.7V / 13.6V) | | Rated Current | 6A max | | Battery range | 12V lead-acid (2Ah–120Ah) | | Operating temp | -20°C to +45°C | | IP rating | IP20 (indoor/dry use only) |
: Connect the Red (+) clip to the positive battery terminal and the Black (-) clip to the negative terminal. A: For standard charging, up to 120Ah (ampere-hour)
Key Features
If unsure, choose Standard. The BX60 will auto-detect battery voltage and condition after a 10-second diagnostic.
Main breaker switch to energize or shut down the internal transformer. Safety Precautions To keep your BX60 functioning for decades to
The battery is damaged internally. Discontinue charging immediately. Reverse polarity connection Turn off power immediately and check clamp orientation. Battery is already full Check the voltage with a digital multimeter. Highly sulfated battery
| Symptom | Likely cause | Fix per manual | |----------------------------------|-----------------------------------|-----------------------------------| | Display stays off | No mains power | Check outlet, fuse in plug | | Flashing E01 | Clamps reversed | Swap red/black | | Flashing E03 | Battery voltage too low (<2V) | Manual recondition mode attempt | | Charging stops at 70% | Bad cell or sulfation | Run refresh cycle | | Fan runs constantly | Normal in bulk/absorption stage | Acceptable – cools power stage |
Ensure the cooling vents are clear of dust and obstructions. Reduce the charging rate from Fast to Slow. Maintenance and Storage Wipe the casing with a dry cloth after every use.