Mitutoyo Surftest Sv400 User Manual Full !!hot!! -

Press the START button. The system will trace the block and calculate a correction factor.

: Switchable between Skidded (uses a guide to track surface contours) and Skidless (measures relative to the drive unit for waviness and step features).

Connect the AC adapter or ensure the rechargeable battery is charged.

Accurate calibration ensures traceability and eliminates system measurement drift. Perform this procedure at the start of every shift. Step 1: Mounting the Specimen

The SV-400 often includes a thermal printer (DPU-414). The manual details how to adjust the "Print Density" via DIP switches inside the battery compartment, not via the touch screen. mitutoyo surftest sv400 user manual full

What you are currently encountering?

The SV-400 consists of three main hardware components: the , the Drive Unit (X-axis) , and the Detector Unit (Z1-axis) . Component Breakdown

Mitutoyo Surftest SV-400 is a high-precision profilometer designed for both laboratory and rigorous production line environments. It is frequently categorized within the SJ-400 Series

Up to 50mm or 100mm (model dependent).

+-------------------------------------------------------------+ | SV-400 SYSTEM | +-------------------------------------------------------------+ | [Column/Granite Base] --> Holds the manual/power Z2-axis | | [Drive Unit] --> Moves the detector along X-axis | | [Detector/Stylus] --> Traces the surface profile | | [Processor Unit/PC] --> Runs SURFPAK software / displays | +-------------------------------------------------------------+ | [Remote Box/Joystick] --> Manual control of X/Z movements | +-------------------------------------------------------------+ 3. Setup and Initial Calibration

Always attach the protective plastic stylus cover when the machine is idle. Raise the detector assembly to the top of the Z-axis column to prevent accidental impacts. 7. Troubleshooting Error Codes Symptom / Error Code Probable Cause Corrective Action Over-range Error Stylus displaced past vertical physical limit. Raise the Z-axis immediately; check for surface steps. No Contact Detected Stylus hanging in free space.

The SJ-400 series is designed for portability while maintaining high precision. Key features include:

values printed on your specific calibration specimen's certificate. Set the evaluation length (typically Press the START button

Check if the detector is securely attached.

The Surftest SV-400 is a sophisticated instrument featuring a traversing unit, a detector (pick-up), a drive unit, and a data processing unit. Unlike basic handheld testers, the SV-400 allows for contour analysis, roughness measurement, and waviness assessment.

The workpiece might not be level, or the height adjustment is outside the permissible measuring range. Level the part using a leveling table and re-adjust the stylus.

Mitutoyo Surftest SV-400 User Manual: The Ultimate Operator & Calibration Guide Connect the AC adapter or ensure the rechargeable