Flashing takes 3–7 minutes. Do not disconnect the cable. When finished, you’ll see a green checkmark.
Note: This tutorial assumes your GPlus P10 runs on a MediaTek chipset, which is standard for this model tier. If your firmware folder contains an .pac file instead of a scatter file, use the SPD Upgrade Tool instead. Step 1: Extract the Files
Firmware is the operating system (in this case, Android) that acts as the backbone of your phone. is the pre-installed software provided by Gplus. When do you need to flash new firmware?
Flashing firmware essentially rewrites the core operating system of your device. This process fixes corrupted system files, clears out stubborn malware, and gets rid of bugs that regular factory resets cannot fix. Understanding Your Gplus P10 Firmware gplus p10 firmware
The stock firmware (or ROM) is the official operating system provided by the manufacturer. Installing this software resets the device's system files entirely. Flashing the stock ROM helps you:
Reinstall the Unisoc USB drivers or try a different USB cable/port.
For most “soft brick” scenarios, choose . Flashing takes 3–7 minutes
If the process fails or encounters an issue, utilize these quick troubleshooting steps:
Use 7-Zip or WinRAR to extract the firmware package. Inside, you should see:
: Use diagnostic codes to check your current version. Dialing *#*#1234#*#* *#*#4986*2650468#*#* Note: This tutorial assumes your GPlus P10 runs
If your phone is acting up but still turns on, you can try a factory reset first: Turn off the phone.
Ensure your GPlus P10 has at least 50% battery charge to prevent it from shutting down mid-process.
: Always verify your specific hardware version before flashing. For example, some GPlus P10 variants (like the P-10 Pro) use specific labels on the box (e.g., "B3" for version 2.3) to indicate which firmware is compatible. Troubleshooting & Maintenance
If you tried to root your Gplus P10 or flash a custom recovery (like TWRP) and something went wrong, the stock firmware is your lifeline.