But with the right guide and the dependable Equatech Universal TV Wall Mount for 32 to 100-inch TVs, the process is much more straightforward than you might think. Known for its heavy-duty design and flexible tilt options, this mount is a popular choice. By following this comprehensive guide, you'll be enjoying your perfectly positioned TV in no time.
Installing an Equatech universal TV wall mount (32 to 100 inches)
Before you begin, it's essential to familiarize yourself with your mount's components. The Equatech mount is a universal design, which means it comes with a variety of hardware to fit most plasma, LCD, and LED flat-screen TVs from 32" to 100".
: Carefully slide the TV horizontally along the plate rails to adjust its left-to-right centering if needed. Engage Safety Locks :
Lay a soft blanket or foam packaging on a flat, sturdy table or on the floor. Carefully place your television screen-face-down onto the protected surface. equatech universal tv wall mount 32 to 100 instructions
: Drill pilot holes into the marked studs and securely fasten the wall plate using lag bolts. Ensure all bolts are tight and the plate is stable.
A: The Equatech mount is universal and supports a wide range of sizes. However, if your specific TV pattern is not natively supported, you can purchase an aftermarket VESA adapter plate. These adapters allow you to convert, for example, a 75x75mm or 100x100mm pattern to a larger 200x200mm pattern, bridging the gap between your TV and the mount.
Installing the Equatech Universal TV Wall Mount Go to product viewer dialog for this item.
Hold the wall plate against the wall, ensuring it's level and aligned with the marks. Insert the screws into the pilot holes and tighten them using a screwdriver. But with the right guide and the dependable
If your TV current has feet or a base stand attached, unscrew and remove it now.
: This mount supports standard VESA patterns, commonly ranging from 200x100mm up to 600x400mm. Check your TV's manual or measure the distance between the four screw holes on the back to ensure a match.
This is the foundation of your entire setup. Get it right, and the rest is easy.
: Sits close to the wall for a modern, "floating" appearance. Prep Your Toolkit Installing an Equatech universal TV wall mount (32
Place the included spirit level across the top of the wall plate. Once the bubble is perfectly centered, use your pencil to mark the exact locations of four mounting holes (two on the left stud, two on the right stud).
Mounting your television clears up media console clutter, optimizes your room's layout, and places your display at the perfect ergonomic viewing angle. The Equatech Universal TV Wall Mount 32"–100" is built from ultra-strong rolled steel to securely hold massive widescreen displays up to a 100-inch capacity.
With the TV brackets now firmly attached to the TV (tighten screws securely): Lift the TV with two people and hook the top edge of the TV brackets onto the wall plate’s top rail. Slowly lower the TV – it should click or settle into place.
typically involves these primary steps, as detailed by various installation guides :