Firstchip — Mptools V1043 Fc1178 Fc1179
This usually means the firmware is damaged. The MpTools will re-flash the firmware to make the drive readable again.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
Yes, despite being a few years old, v1043 remains the "golden version" for FC1178 and FC1179 because newer versions (v1079, v1104) often introduce proprietary locking mechanisms for specific OEMs (like PNY or Kingston). The v1043 build is open, community-verified, and lacks the telemetry or timed locks found in later releases. firstchip mptools v1043 fc1178 fc1179
: Look for "FirstChip FC1178/FC1179 MpTools" on reputable repair sites like USBDev.ru .
Unzip the file and run FirstChip_MpTools.exe (usually in Chinese, but the UI is standard). Plug in your corrupted USB drive. This usually means the firmware is damaged
: An older generation controller frequently found in promotional USB drives and budget storage devices.
: This indicates physical degradation of the NAND flash memory. Re-enter the Settings menu and increase the ECC (Error Correction Code) value, or manually cap the drive's maximum target capacity to a lower value (e.g., forcing a failing 64GB drive down to a stable 32GB). Tool Freezes During Scan This link or copies made by others cannot be deleted
These chips are frequently used in cheaper, high-capacity USB drives (USB 2.0 and 3.0) and USB-based Micro SD card readers. How to Use FirstChip MPTools v1043 (Step-by-Step)
In the tab, choose Low-Level Scan (or "Default Scan") if the drive has severe corruption. Choose High-Level Scan if you only want to clear a simple write-protection error quickly.
| Error Code | Meaning | Solution | | :--- | :--- | :--- | | | Flash ID mismatch | Manually select the correct Flash IC in "Flash Setting" | | 0x120 | Bad block overflow | Reduce the target capacity or perform "Erase All Blocks" first | | 0x302 | Firmware download failed | Re-short the pins; your controller may be in a locked state |
