Resetter Printer Canon G2010 -

: A popular software used to read and reset waste ink counters. You can download it from WIC Reset Connect Canon Service Tool (V5105 or newer)

to clear waste ink counter errors (like 5B00 or P07) or use the on-device menu to initialize general settings. Manual Reset (Service Mode)

No. Resetter tools require low-level USB access to the printer’s EEPROM. Smartphones (iOS/Android) cannot provide this.

After the software confirms the reset, you need to save the new configuration data to the printer's memory: resetter printer canon g2010

Right-click on the software file and choose . Step 3: Clear the Waste Ink Counter

Resetting the software doesn't physically empty the waste ink. You should eventually clean or replace the ink pads to avoid actual leaks.

button once to confirm. The printer should print a page showing , indicating a successful reset to 0%. : A popular software used to read and

Using a resetter is the only DIY method to revive a "bricked" Canon G2010 due to the waste ink error. However, there is a : you should only reset the counter after you have physically cleaned or replaced the waste ink pads. Resetting without cleaning can lead to ink leaking inside your printer, causing permanent electrical damage.

Let’s be clear: The is a software patch, not a hardware solution.

Follow these steps methodically. Rushing or missing a step can cause the reset to fail. Resetter tools require low-level USB access to the

uses a small sponge-like pad to collect excess ink during cleaning cycles, start-up, and borderless printing. The printer firmware keeps a precise count of every drop sent to this pad.

This method is the standard for technicians and home users alike. The is a dedicated application that communicates directly with the printer's EEPROM to perform an absorber counter reset. It provides more control and is useful for multiple resets.