Mvci Multi Driver X64 Install: Autokent
If you are working with J2534 diagnostic interfaces like the Toyota Mini VCI, Honda HDS, or Volvo Dice, you’ve likely encountered the "64-bit hurdle." Most original drivers for these cables were designed for 32-bit Windows XP or 7, making them a nightmare to install on modern Windows 10 or 11 x64 systems.
Ensure your MVCI (Mini VCI) cable is unplugged until prompted.
The Autokent installer usually handles registry routing automatically, but manual verification ensures software compatibility: Press Windows Key + R , type regedit , and hit Enter.
Once finished, locate the extracted folder and find the file. autokent mvci multi driver x64 install
Before you plug anything into your computer or start installing software, there are a few golden rules you must follow to prevent driver conflicts:
This article serves as your definitive guide. We will unpack what the Autokent MVCI is, why the x64 driver installation is uniquely problematic, and provide a step-by-step walkthrough to ensure a successful, stable setup on modern 64-bit Windows systems.
Point the search to the folder where you extracted the drivers (e.g., C:\Program Files (x86)\XHorse Electronics\MVCI Driver for TOYOTA TIS ) and ensure "Include subfolders" is checked. If you are working with J2534 diagnostic interfaces
Many security programs falsely flag the driver files as malware (specifically the firmware updater tools) and will quarantine them. Turn off your antivirus temporarily during the installation.
Once the driver is installed, you must tell your diagnostic software to use it:
I can provide specific registry fixes or registry files tailored to your configuration. Share public link Once finished, locate the extracted folder and find the file
Double-click the .reg file and confirm the merge with your Windows registry. Run the FirmwareUpdateTool.exe found in the driver folder.
Plug the USB end of your Mini VCI cable into a (Avoid USB 3.0 ports, as they often cause communication errors with older OBD cables).
Repeat this for the second device. Once finished, they should appear as "USB Serial Converter" and "USB Serial Port (COM N)". Registry Modification Locate the mvci-x64.reg file within your Autokent folder.