You will be prompted to input the new Software ID generated by your current installation.
If your goal is related to licensing or support, ensure you have a valid license. The license is tied to the Software ID.
Since you asked to "draft a paper," here is a concise structured outline/abstract for a technical briefing on the subject:
The license is embedded in the RouterBOOT. If you buy a used RouterBoard, the license stays with the board. If you need to transfer a license to a RouterBoard, you must use the "Sell" command on the old device first. mikrotik change software id link
Another common problem involves attempting to use the "Update license key" button improperly. This button is specifically designed for upgrading an to work with the new 8-character SoftID format. It will not generate a replacement key for a lost license.
Go to the official website at and log into your Account. Click on work with keys or My Licenses .
Install RouterOS onto the new storage media using Netinstall or your hypervisor ISO. Boot up the new system and log in via WinBox. Navigate to > License . You will be prompted to input the new
There are two main SoftID formats you may encounter. Older installations used a 7-character format (e.g., M61X-UPT). Newer installations, since RouterOS versions 3.25 and 4.0 beta, use an 8-character format with a dash, such as XXXX-XXXX.
The ID is calculated based on specific physical characteristics and sector layouts of your storage media.
Once your instance is communicating with your account, any unused prepaid keys or active perpetual licenses can be assigned to the new CHR Software ID directly from your online dashboard. Since you asked to "draft a paper," here
.header background: linear-gradient(135deg, #667eea 0%, #764ba2 100%); color: white; padding: 30px; text-align: center;
The Software ID will change if you perform any of the following actions:
.header h1 font-size: 28px; margin-bottom: 10px;
If your Software ID has changed due to hardware migration or disk replacement, you will be faced with an "Incorrect Software ID" error when trying to use your old license. You cannot directly type the old key into the new Software ID; instead, you must officially transfer or replace the license via the . Step-by-Step License Replacement Procedure Log In: Navigate to the MikroTik Account Manager.