Absolutely. While newer MP tools exist, has earned a reputation for being the last stable version that supports a wide range of legacy and mid-range Phison USB controllers without the bloated interface or forced telemetry found in newer builds.
Removes stubborn "Disk is Write-Protected" hardware flags.
The status box will change colors. indicates a successful flash. Red indicates an error code (e.g., CT-0x1042 or CT-0x1044), which usually means either the wrong burner file was selected, or the flash memory configuration requires a lower-level format string.
Unscrew the USB casing (if possible) and look for a black rectangular chip with "Phison" and a model number starting with "PS". Phison Mpall V5.13.0c
Have you successfully resurrected a USB drive using Phison MPall v5.13.0c? Share your experience in the comments below. For more guides on low-level flash repair, subscribe to our newsletter.
If Phison MPALL v5.13.0c does not work for your drive, or if you are not comfortable with its risks, there are alternative tools you can try:
disconnect the drive until a green "OK" or "Finish" status appears. Critical Troubleshooting Absolutely
: A highly popular USB 3.0 controller used in millions of consumer drives. PS2251-09 : An upgraded USB 3.1 controller.
Click and save the configuration file as MP.ini inside the main MPALL directory. Close the parameter editor. Step 4: Execute the Flashing Process via MPALL
Before using V5.13.0c in production:
You must verify that your USB drive actually contains a compatible Phison controller before downloading MPALL. Using this tool on a Silicon Motion (SMI), Alcor, or Kingston controller will fail and may permanently brick the hardware.
What or code are you getting in MPALL? What is the brand and model of your USB drive?
Run the diagnostic tool and look for the (must be Phison) and the Controller Part-Number (e.g., PS2251-07). Note down the Flash ID code and Firmware Version displayed. Step 2: Download the Matching Firmware Files MPALL requires two distinct binary files to flash a drive: The status box will change colors