Invt Che100-0r7g-s2 Manual [verified] Jun 2026

Check the input power supply for drops or loose connections.

Settle the abnormality. No. Achieve the required control. Yes. End. Motor parameter. autotuning (set P0.12) Output frequency. Max.

Install in a dust-free, non-corrosive environment.

Features include 8-step speed control, PID control, and an Automatic Voltage Regulator (AVR) to stabilize output during input fluctuations. Common Parameter Settings Function Code Description Default / Note Maximum Frequency Upper Frequency Limit Lower Frequency Limit Acceleration Time Model dependent (e.g., 5.0s) Deceleration Time Model dependent S1 Terminal Function 1 (Forward) Installation & Maintenance invt che100-0r7g-s2 manual

Features rapid torque response and high speed control accuracy.

To perform this:

Overall, the manual for the INVT CHE100-0R7G-S2 is a valuable resource for users, providing detailed information on the device's features, specifications, and operation. While there may be some areas for improvement, the manual is well-written, comprehensive, and easy to understand. Check the input power supply for drops or loose connections

You can find the full documentation on these reputable platforms: ManualsLib - Operation Manual (124 pages) INVT Official Download Center Scribd - CHE100 User Manual PDF

Command Source (Set to 0 for Keypad, 1 for Terminal Control). P0.03: Max Frequency (Default 50.00Hz or 60.00Hz). P0.11/P0.12: Acceleration/Deceleration Time. Motor Parameter Setup For better control accuracy, perform motor auto-tuning: Set P0.17 (Motor Parameter Identification) to 1. Press RUN. 5. Troubleshooting (Fault Codes)

| Terminal | Signal | Description | | :--- | :--- | :--- | | L, N | Power Input | Single-phase 220V AC (L = live, N = neutral) | | U, V, W | Motor Output | Connect to 3-phase motor (0.75kW max) | | E | Ground | Earth ground (mandatory for safety and noise reduction) | | S1, S2, S3 | Digital Inputs | Multi-function inputs (default: FWD, REV, fault reset) | | +10V, AI1, GND | Analog Input | 0–10V speed reference (potentiometer wiring) | | TA, TB, TC | Relay Output | Fault indication relay (TA-TC = NO, TB-TC = NC) | Achieve the required control

The mini structure is designed to save installation space while maintaining reliable performance. www.efesotomasyon.com Technical Resources

Optimized for Pump & Fan applications to reduce power consumption. 📖 Installation & Setup Essentials