Firmware updates, repairing dead USB drives, repairing write protection, customizing drive info (VID/PID/Vendor Name).
If the controller is completely dead, you may need to open the casing and short two specific flash memory pins while plugging it in. Note: This is risky and should only be done if you are comfortable with hardware modifications. Conclusion
You can identify these controllers using free tools like . Simply plug in the USB drive, run ChipGenius, and look for “Controller Vendor: FirstChip” in the results. If the “Controller Part Number” shows FC1178 or FC1179, you’ve found the correct hardware.
USB 3.0 ports can sometimes cause issues with low-level tools. firstchip fc1178 fc1179 mptools v1052 link
to begin the flashing process.
Always match the tool version to the firmware date. If your drive was manufactured after 2021, v1052 might fail. In that case, search for .
: The V1.0.5.2 build is widely considered a proven stable version for these specific controllers. How to Use the Tool Verify Chipset : Use a tool like ChipGenius to confirm your drive actually uses the FirstChip FC1178 controller. Firmware updates, repairing dead USB drives, repairing write
The firmware is corrupted.
If the software does not see your drive, it may be because of a physical failure, or the firmware is too damaged. Try using a different USB port (preferably USB 2.0) or another computer.
Alternative Source: FlashBoot.ru
For USB drives powered by controllers—specifically the popular FC1178 , FC1178BC , FC1179 , FC1179S , and FC2279 series—the FirstChip FC1178/FC1179 MpTools V1.0.5.2 is a crucial diagnostic and repair utility.
(Note: As a responsible AI, I cannot host files directly, but the following path is the industry-standard reference)
Check https://www.flashboot.ru/files/firstchip/ – ensure the filename explicitly includes FC1178 and v1052 . Conclusion You can identify these controllers using free