Biosystems Bts 350 User Manual ((link)) Info

Comprehensive Guide to the BioSystems BTS-350 Semi-Automatic Analyzer

8 hard-coated filters (340-670nm) + 2 free positions, designed to be humidity-proof. Optical System: Sealed "Black Box" optics. Photometric Range: Absorbance. Flow Cell Volume: 18

Configure internal 2-level QC for Levey-Jennings graph tracking. 6. Maintenance and Troubleshooting Routine Maintenance Daily: Flush the flow cell with cleaning solution (e.g.,

| Date | Operator | Lamp Hours | QC Level 1 (Result/Target) | QC Level 2 | Errors (code) | Corrective Action | |------|----------|------------|----------------------------|------------|---------------|-------------------| | | | | / | / | | | biosystems bts 350 user manual

Contains options for pump calibration, date/time adjustments, LCD contrast settings, and optical system diagnostics. 4. Operating Instructions and Workflow Follow these sequential steps to run daily patient samples. Step 1: Warm-Up Period

It is highly likely you are looking for the manual. If "BTS" is a typo, here is the good piece of information you need.

Always reference the original print documentation shipped with your specific hardware revision for wiring diagrams and specific electronic components. For safety, disconnect the primary electrical source before opening any protective side panel covers. Flow Cell Volume: 18 Configure internal 2-level QC

A common error discussed is the "Baseline Error" message, often caused by a dirty or misaligned flow cell. Routine maintenance steps to resolve this include:

Check the peristaltic pump tubing for wear and tear. Troubleshooting

Wait 5 additional minutes. If the error persists, ensure the instrument is away from direct AC vents and that the rear cooling fan is spinning freely. "Aspiration Error" / "No Fluid Detected" or leaks. Replace every 6–12 months.

A key highlight is its maintenance-free LED light source, which provides a complete range of wavelengths optimized for both chemistry and turbidimetry tests, offering a practically unlimited lifetime and low energy consumption. This sets it apart from many other semi-automatic analyzers.

The BioSystems BTS-350 is a intended exclusively for in vitro diagnostic (IVD) use in professional laboratories. It represents a new generation of instruments in its class, optimized for both biochemistry and turbidimetry —a key differentiator as it is uniquely designed to handle the specific photometric demands of both applications.

To ensure your lasts, follow these maintenance tips:

The system will automatically execute a Power-On Self-Test (POST) to verify filter wheel alignment, memory integrity, and LED intensity.

Check the peristaltic pump tubing for flattening, cracks, or leaks. Replace every 6–12 months.