Launch a web browser and navigate to https://[iRMC-IP-Address] .
Are the default credentials different for any iRMC generation? A: No. All iRMC generations from S2 through S6 use admin for both username and password. This is documented in every official user guide.
Legacy systems used hardcoded, universal default credentials across production lines. : admin Password : admin Step-by-Step: Accessing the iRMC Web Interface
For older Fujitsu server models, a standard, universal account was hardcoded into the firmware at the factory. admin Default Password: admin fujitsu irmc default password
The change takes effect immediately without reboot.
Some iRMC versions allow you to load a configuration file from a FAT32-formatted USB drive. Create a file irmc.cfg containing:
ipmitool user set password 2 'P@ssw0rd!2024' All iRMC generations from S2 through S6 use
Avoid managing local user accounts across large clusters of servers. Configure the iRMC to authenticate credentials through your enterprise directory services. iRMC fully supports: LDAP / LDAPS RADIUS / TACACS+
+--------------------------------------------------------------+ | FUJITSU iRMC LOGIN | +--------------------------------------------------------------+ | | | Username: [ admin ] (Case-Sensitive) | | | | Password: [ ************************* ] (S2-S5: admin) | | (S6+: See ID Card) | | | [ LOG IN ] | +--------------------------------------------------------------+ Legacy Generations (iRMC S2, S3, S4, S5)
The simplicity of the default credentials makes the management interface highly vulnerable to automated scanning tools and scripted attacks on a network. Once logged in, an attacker—or a malicious insider—has full administrative control over the target server. This level of access, known as Lights-Out Management (LOM), allows an attacker to perform a wide range of destructive actions, including: : admin Password : admin Step-by-Step: Accessing the
Older systems often shipped with the static default password admin .
Fujitsu iRMC Default Password Guide: Accessing and Securing Your Server Management
Instead, every single server is shipped with a unique, randomly generated factory password. You can find this password printed physically on the located at the front or rear of the server chassis, usually next to the server serial number/ID code. Default Username: admin
When the Fujitsu splash screen appears, press repeatedly to enter the System BIOS Setup .
Reset the admin password (user 2 is typically admin): ipmitool user set password 2 . Log in via the web interface with the new password. Using ServerView Installation Manager (SVIM)