Dell D220p 01 Power Supply Pinout 2 [portable] Guide

If you are looking for specific replacement parts, you can check compatibility on CPUMedics .

Once you bridge the Blue wire to the Ground loop and create stable 12V output trunks, this power brick serves several roles perfectly:

Verified against Dell’s original schematics and real-world testing. Do not trust generic “Dell PSU pinout” images – use the table above.

This is often a sign of overcurrent protection or missing +5VSB load. Ensure your jumper is secure. Also check if any output rail is shorted. The D220P-01 uses "latching" overvoltage/overcurrent protection – you must unplug AC for 30 seconds to reset. Dell D220p 01 Power Supply Pinout 2

Here’s a solid, technical review of the (often searched as “Dell D220p 01 Power Supply Pinout 2” due to its two main connector variants).

The Dell D220p 01 PSU is a 220-watt power supply designed for efficiency and reliability. It features an 80 PLUS certification, indicating that it meets certain standards for efficiency. The PSU has multiple connectors for powering different components of a computer system, including the motherboard, hard drives, and graphics cards.

Note: Some documentation labels Pins 6, 7, and 8 as Ground and Pin 5 as the Remote Signal. Technical Specifications 100–240V AC, 50–60Hz, 4A. 12V DC at 18A (Total 216W–220W). Safety Features: If you are looking for specific replacement parts,

Dell D220P-01 (part of the DA-2 series) is a 216W external power brick providing 12V at 18A. It uses a proprietary 8-pin connector that is mechanically similar to an 8-pin EPS/PCIe connector but has a completely different and incompatible electrical pinout. CPU Medics Connector Pinout Specifications The following pinout is for the female receptacle

The ATX connector is usually a 20-pin or 24-pin connector that supplies power to the motherboard.

This is the small connector, usually located near the main 20-pin but on a separate harness. It has 6 positions (2x3) but may have only 4 or 5 wires populated. This is often a sign of overcurrent protection

For years, techs have salvaged these units for their surprising build quality (Delta is known for robust components) or attempted to adapt them for standard motherboards. Miswiring this unit will cause immediate short circuits, motherboard damage, or trigger the PSU’s "latching" protection mode.

If you are looking to purchase this unit, check that the interface matches your machine, as some similar-looking adapters have different pin configurations.