Before diving into the specifics of VID 0930 PID 6544, it's essential to understand what VID and PID stand for. VID is short for Vendor ID, and PID stands for Product ID. These are unique identifiers assigned to hardware devices by their manufacturers. The VID is used to identify the vendor of the device, while the PID identifies a specific product from that vendor.
Every USB device is assigned a pair of 16-bit numbers to help the computer identify it:
Run the flashing utility as an administrator to overwrite the damaged firmware sector.
. This specific hardware ID is commonly used by 8GB, 16GB, and 32GB Toshiba thumb drives, as well as some rebranded Kingston DataTraveler units.
To fix this specific device, you need the . Unlike general format utilities, the MP tool sends low-level commands directly to the controller chip, bypassing the corrupted partition table. vid 0930 pid 6544
Type list disk to display all connected drives. Identify your flash drive by its size (e.g., 8GB, 16GB, 32GB).
Corrupted software layers can block proper communication with the drive controller.
You can view files, but you cannot copy new items to the drive or format it. This occurs when the controller locks the NAND memory to prevent data corruption after exhausting its write cycles.
: On Windows, one can find the VID and PID of a device through the Device Manager. By checking the device's properties, users can see its hardware IDs, which include the VID and PID. Before diving into the specifics of VID 0930
Are you trying to from a broken drive or fix a write-protection error? I/O Device Error: USB VID 0930 PID 6544 | PDF - Scribd
Run the utility to execute a low-level format, which clears the NAND blocks and reflashes the controller layout. Note: This will permanently erase all data on the drive. Hardware Specifications for Reference Value / Detail Kioxia / Toshiba Memory Device Class Mass Storage Device Protocol USB 2.0 / USB 3.0 Backward Compatible Typical Controller Phison Electronics Corp Native Driver USBSTOR.SYS (Windows Native)
The hardware identifier corresponds to a Toshiba TransMemory USB 2.0 Flash Drive Go to product viewer dialog for this item.
The drive registers in Windows Disk Management but shows its file system format as rather than FAT32 or NTFS. The partition table has degraded, preventing the operating system from reading the directory indices. Windows "I/O Device Error" The VID is used to identify the vendor
Disconnect the physical drive from the machine, reboot your system, and reconnect the flash drive to prompt Windows to rebuild clean driver associations. Method 3: Forced Partition Deletion Using Diskpart
The identifier typically corresponds to the TransMemory U202
If your drive keeps disconnecting and reconnecting: