Kes Geyser Load Control Timer Manual New Extra Quality

Adjusts the minute setting for the clock and timers.

If the unit is old, the internal backup battery may no longer hold a charge, requiring a replacement of the digital timer unit. 7. Safety Precautions and Maintenance

Enters the scheduling menu and cycles through the 16 ON and OFF slots. D+ (Day): Sets or modifies the days of the week.

This profile is designed to accommodate solar geysers. It turns the geyser's electrical element "ON" after sunset to ensure you have hot water through the night when solar heating is no longer available. kes geyser load control timer manual new

Despite being a reliable device, users can sometimes encounter issues. These problems, and their potential fixes, have been shared by owners in community forums like MyBroadband and Fixya.

What is the difference between a "load control timer" like the ISG1201 and a standard timer?

While the standard timer is effective, newer smart home technology offers even more control. A WiFi geyser timer connects to your home's wireless network, allowing you to control your geyser remotely using a mobile app. Adjusts the minute setting for the clock and timers

To set additional profiles (up to 16 slots), press again to access 2 ON , 2 OFF , etc.

By scheduling your geyser to run only in the mornings/evenings, you can save substantially more than using a geyser blanket alone. If you'd like, I can:

While still holding the Clock button, press to adjust the current hour (uses a 24-hour clock format). It turns the geyser's electrical element "ON" after

Enters the scheduling menu and cycles through the 16 available On/Off slots.

1.2V Rechargeable Lithium (retains clock and program memory during power outages) Mounting Standard: 35mm DIN Rail 2. Installation and Wiring Diagram

This profile is the default setting and effectively disables the timer function, keeping the geyser powered on continuously. It is useful if you have a specific need for constant hot water or as a temporary override.

Press , H+ , and M+ to set the time you want the geyser to turn OFF . Repeat for settings 2, 3, or 4 if needed.