User Manual: V2000-c

Before powering up the unit, ensure your physical installation meets safety standards. Mounting the Controller

: Functions as the dedicated terminal for connecting hardwired doorbell button triggers.

The door relay open time determines how long the door stays unlocked after a successful entry. The default setting is 5 seconds. Enter Programming Mode. Press 4 . v2000-c user manual

Includes a built-in alarm that triggers if the device is forcibly removed or dismantled.

: Wire directly to the negative terminal of your power supply. Before powering up the unit, ensure your physical

1 × Installation Kit (Wall plugs, security screws, and a specialized star screwdriver)

Congratulations on your acquisition of the V2000-C Domestic Companion unit. Engineered by Aethelgard Robotics , the V2000-C represents the pinnacle of mid-century synthetic humanoids. Designed for household management, companionship, and light administrative duties, your unit is guaranteed to provide years of loyal, faultless service. The default setting is 5 seconds

Warning: Do not ask the V2000-C to walk pets. The unit lacks the fine motor control to adjust grip strength for organic leashes, often resulting in dragged animals.

Before starting your installation, verify that your local mounting environment aligns with the hardware limits of your controller: Specification Details 12V DC ± 10% Regulated Idle / Operating Current < 100mA (< 0.1A) Lock Output Relay Capacity 2A maximum inductive load Storage / Token Capacity 2000 user cards and 1 common door PIN Proximity Card Frequency 125kHz EM ID cards (Mifare optional on selective versions) Token Read Range 5cm to 15cm Working Temperature Range -10°C to 70°C (14°F to 158°F) Relative Humidity Limits 20% to 90% RH (non-condensing) Integrated Input / Output Wiegand 26 input/output, Exit button, Doorbell Device Terminal Wiring Guide

To keep your V2000-C secure and functional, update firmware when released. The standard procedure is: