Sunxi-tools Windows -

(System on Chips), such as Orange Pi, Banana Pi, and CubieBoard

Place your script.bin in the tool folder and run provided batch files like bin2fex.bat . 2. Installing via WSL (Recommended)

If you prefer standalone Windows .exe binaries, you can natively cross-compile using a local environment.

If you prefer working inside a native Linux environment but want to stay within Windows, WSL 2 combined with USBIPD is a powerful alternative. Step 1: Install WSL 2 and Ubuntu Open PowerShell as Administrator and run: powershell wsl --install Use code with caution. sunxi-tools windows

This guide provides a complete walkthrough to get sunxi-tools up and running in a Windows environment.

sudo apt update sudo apt install sunxi-tools

: Provides the most up-to-date features and best compatibility with the original source. 2. Pre-compiled Binaries & GUI (System on Chips), such as Orange Pi, Banana

Restart your computer if prompted, and set up your Linux username and password. Step 2: Install USB Passthrough (usbipd-win)

The sunxi-tools suite is composed of several key utilities, each serving a specific purpose in the Allwinner ecosystem:

Select your Allwinner device from the dropdown menu (it typically appears as , "Allwinner FEL" , or displays the USB ID 1f3a:efe8 ). If you prefer working inside a native Linux

For most users, the quickest path is to download a pre-built Windows executable, such as sunxi-fel.exe . These can be found in community-maintained archives like sunxi-tools-win32_f1_flash.zip , a 271KB package intended for Allwinner F1C100s chips. However, be cautious: many of these pre-built binaries are version-specific and may not support your particular Allwinner SoC.

# The 'sunxi-fel.exe' command must be run from an elevated command prompt or an environment with proper USB drivers. sunxi-fel -p spiflash-write 0 u-boot-sunxi-with-spl.bin

Download and launch (an open-source USB driver installation GUI). Click Options > Check List All Devices .

Repositories like J-Rios/Sunxi-Tools-Win-src often provide ready-to-use binaries for basic tasks like FEX conversion.

Most Allwinner boards have a specific button labeled "FEL" or "Recovery." Power off the board, hold the FEL button, connect the USB OTG cable to your PC, and then release the button.