4–24mA (Sink/Source), Optional RS-485 Modbus, Foundation Fieldbus Relay Outputs (Optional): 3 x SPDT Form C (5A at 250V AC)
The Xnx Universal Transmitter is a compact, multi-protocol wireless transmitter designed to send sensor, control, and telemetry data to receivers and hubs. This quick start guide gets you from unboxing to a validated live transmission, with practical tips and troubleshooting.
Hold the Enter (✓) magnet switch for 3 seconds to access the menu structure. 2. Selecting the Sensor Type Xnx Universal Transmitter Quick Start Guide
Navigating the 4-20mA and HART loop without crossing your streams [1, 5]. Configuration:
Purge the sensor with clean air before returning the unit to online status. Troubleshooting Fault and Alarm Codes Troubleshooting Fault and Alarm Codes The XNX display
The XNX display shows specific code types when the unit encounters operational problems. Code Category Typical Action
Q: What is the Xnx Universal Transmitter? A: The Xnx Universal Transmitter is a versatile device designed for universal transmitter applications in industrial settings. Before handling the equipment
Before handling the equipment, observe the following safety protocols to prevent personal injury or damage to the device:
: Wait for the display countdown to finish (typically 3–5 minutes).
Enter the passcode (Default passcodes can be found in the manufacturer's user manual).
The system enters a warm-up phase (typically 30 to 120 seconds depending on the attached sensor).