3 x NTC Thermistors (Appliance, Condenser, and Evaporator) Digital Inputs: 1 x Door Switch Sensor
The ems55advanced acts as a data logger. It starts gathering statistics from the moment it is first powered up, including the lowest, highest, and average temperatures recorded. These statistics are invaluable for validating equipment performance during warranty periods or service disputes.
The Elstat EMS 55 Advanced is an energy management system designed to optimize commercial refrigeration performance. This comprehensive technical manual provides the instructions needed to program, commission, and troubleshoot the EMS 55 Advanced controller. 1. System Overview and Technical Specifications
Uses both an appliance sensor (-15°C to +23.5°C) and a condenser sensor (+50°C to +125°C) for higher accuracy. combustioncontrols.pk The "Key Dance" (Configuration Menu)
The also explains how to enable an "audit trail" feature (parameter AudT set to on ), which records every key press and parameter change in non-volatile memory. Once enabled, it cannot be disabled without a master reset. elstat ems 55 advanced user manual new
If you need further assistance with your configuration, please share your , the specific error code showing on your display, or the refrigeration model you are working with. Share public link
High temperature alarm. This often indicates a blocked condenser or inadequate ventilation.
Displays 8.8.8. to ensure the LED screen is working.
The new Elstat EMS 55 has abandoned legacy serial ports for a mass-storage USB interface. However, this requires specific advanced handling. 3 x NTC Thermistors (Appliance, Condenser, and Evaporator)
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.
The controller creates a 7-day (7 x 24 hour) matrix. Each 24-hour period is divided into 48 thirty-minute blocks. The controller assigns one of three states to each block:
Indicates the system is operating in energy-saving mode. 4. Entering Configuration Mode and Changing Parameters
RSF : The cooler didn't reach the target temperature within the set time. Check for a blocked condenser or gas leak. The Elstat EMS 55 Advanced is an energy
Understanding the hardware interface and physical constraints ensures safe operation and accurate sensor calibration. Physical Dimensions and Mounting 75mm x 33mm Mounting Cutout: 71mm x 29mm
The controller enters Ready Mode during business hours when it detects frequent door openings or motion.
The cooler is ready for customer use. Lights are on , and the product is maintained at the optimal serving temperature (e.g., 36°F–38°F).
The EMS 55 is an intelligent controller that replaces standard thermostats. It learns the usage patterns of a retail environment to determine when a cooler should be in "Ready Mode" (active cooling) or "Saving Mode" (energy conservation). : Monitors door openings and motion. Energy Savings : Can reduce consumption by up to 35%.
: Uses an appliance sensor (air temp) and a condenser sensor (safety). 🛠 Operation Modes 1. Ready Mode This is the standard operating state during business hours. The controller maintains the set-point temperature. The lights remain ON . The fan cycles normally to ensure even cooling. 2. Saving Mode