If you're expanding beyond a single port, retailers like CDW and PCNation carry the full Edgeport line, including 4-port and 8-port industrial models.
To successfully install the , you must use the official Digi Edgeport driver version 6.05 (or newer) and install it before plugging the device into your computer .
To ensure a clean setup on Windows 10, follow the official Digi installation procedure :
Windows will automatically detect the hardware and match it with the newly installed driver. digi edgeport 1 driver windows 10 64 bit
To install the Digi Edgeport/1 driver on Windows 10 64-bit, follow these steps:
The Digi Edgeport/1 requires specific drivers to translate USB signals into standard COM port signals. Windows 10 (64-bit) architecture enforces strict driver signing. This means you must use officially certified Digi drivers to avoid installation blocks. Supported Hardware Features USB Type A to DB-9 RS-232 serial port. Data Rates: Up to 230 Kbps per serial port.
If you encounter issues during driver installation or the device is not functioning as expected, try the following troubleshooting steps: If you're expanding beyond a single port, retailers
If you encounter persistent issues, check Device Manager for USB resource conflicts, disable legacy USB support in your BIOS, or reach out to Digi’s technical support – they still provide assistance for these time-tested devices.
Sometimes the assigned COM port number conflicts with an existing virtual or physical port. Right-click the Edgeport device in Device Manager →right arrow Properties →right arrow Port Settings →right arrow
What specific are you trying to link to the COM port? To install the Digi Edgeport/1 driver on Windows
Before starting the installation, download the latest official driver package directly from Digi's support FTP: . Ensure you do not have the Edgeport device physically connected to your computer during this phase, and log in as an administrator.
Search for the 40002537_6.05_N.exe driver (or newer) on the Digi website.
What (e.g., CNC machine, scale, PLC) are you connecting to the serial port?