Canon Service Tool V5610 Install -

The tool uses unsigned drivers. To allow them:

Turn the printer off for 10 seconds, then back on to resume normal operation.

: Many versions found online are sold with a single-PC license tied to your computer's Hardware ID (HWID), meaning you cannot move it to another PC without buying a new key. Critical Security & Safety Warnings Malware Risk not official consumer software Canon Support

The official Canon printer driver must be installed on your PC. Enter Service Mode (Mandatory Step)

Canon Service Tool v5610 is a specialized maintenance utility used primarily to reset the "waste ink absorber" counter (error codes like 5B00 or 1700) on many Canon Pixma and G-series printers. Key Features & Usage canon service tool v5610 install

It's crucial to understand that this is third-party software not officially supported by Canon. , so it's essential to follow these instructions carefully and be aware of the risks involved.

The official Canon printer driver must be fully installed and recognized by the Windows operating system.

The displayed on your computer screen or printer LCD

Which is installed on your computer? Share public link The tool uses unsigned drivers

Right-click the downloaded ZIP folder and select .

Because the Service Tool is a proprietary utility intended for service centers, it does not feature a traditional Windows installation wizard. Instead, it runs as a standalone portable executable file. Step 1: Download and Extract the Software

Press the button on the printer to turn it off. (It might take a few moments to shut down while in Service Mode).

You will need to look for an alternative version, such as v4905 for older models or v6000 for newer enterprise models. Important Safety Warning Critical Security & Safety Warnings Malware Risk not

Once the interface loads, look at the top section labeled . If the options are grayed out, your printer is either not in Service Mode or the USB connection is faulty.

The interface looks like software from the Windows 98 era. It is a grey box with cryptic buttons like "Main," "Platen," "Ink Absorber," and "EEPROM."

The V5610 version is highly stable and specifically designed for Canon Pixma G-Series, MG-Series, TS-Series, and IB-Series printers, including:

: In the "Main" tab, find the "Waste Ink Counter" section. Set the Main absorber counter to 0% and click Set .

: Provides a real-time percentage view of the waste ink tank's capacity.