((install)) — Service Manual Cobas Integra 400 Plus
Houses the reagent rotor, sample rotor, cuvette rotor, and pipetting systems.
Perform standard cleaning and conditioning cycles for the sodium ( Na+cap N a raised to the positive power ), potassium ( K+cap K raised to the positive power ), chloride ( Cl−cap C l raised to the negative power ), and reference electrodes. Weekly and Monthly Maintenance Tasks
Certain high-level technical tasks, such as cleaning the internal water reservoir, are detailed in specific service guides: Preparation
The user interface keeps operators informed about the system's status through messages, the status work area, and results flags. The manual explains how to interpret and respond to these notifications, categorized by severity:
: The system performs automatic service actions at a pre-set time (e.g., 08:00 AM). Check the report via File > Print Report > Begin of Day to plan calibrator and control loading. Reagent & Waste Management : Service Manual Cobas Integra 400 Plus
Serum, plasma, urine, CSF, hemolysate, and whole blood.
The service manual provides detailed troubleshooting guides for common issues and error messages that may occur during operation. This includes:
Inspect and lubricate the guide rails of the pipetting arms using manual-approved lubricants. Bi-Annual & Annual Service
Perform a visual inspection of the fluidic lines for bubbles or leaks. Clean the sample and reagent probes with a lint-free cloth. Houses the reagent rotor, sample rotor, cuvette rotor,
Official service and operator documentation can be found through the Roche eLabDoc Portal Key Technical Specifications Throughput : Up to 400 tests per hour. Onboard Capacity
This comprehensive guide breaks down the core structural components, routine service requirements, error codes, and maintenance protocols outlined in the technical service documentation. 1. System Overview and Architecture
For field service engineers, the manual is a step-by-step guide to bringing the unit online. Key phases include:
The Cobas Integra 400 Plus is a fully automated analyzer that uses a modular design to perform various laboratory tests. The instrument consists of the following main components: The manual explains how to interpret and respond
Utilizes a single probe dual-arm assembly equipped with liquid level detection (LLD), clot detection, and temperature-controlled pre-heating.
Consists of high-precision syringes, degassers, pinch valves, and vacuum lines that drive the aspiration, dispensing, and waste removal actions. 2. Installation and Environmental Requirements
The Roche Cobas Integra 400 Plus is a robust, clinical chemistry analyzer found in laboratories worldwide. To ensure maximum uptime, accurate diagnostic results, and compliance with quality standards, biomedical equipment technicians (BMETs) and laboratory managers must understand the system's internal architecture.
Clean the ISE module fluidic paths. Check for micro-bubbles in the reference channel. Replace the specific electrode if it has exceeded its standard lifecycle (typically 6 months or a set number of injections). Error: "Reagent / Sample Probe Clogged"
Resources like the COBAS INTEGRA 400 plus Training Manual are available for in-depth knowledge on configuration and service procedures.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.