The v2.0.57 upgrade tool includes the following primary modifications:
Introduction xTool’s Upgrade Tool v2.0.57 brings targeted stability fixes and a small set of user-facing improvements focused on smoother device firmware updates and clearer progress feedback. This release is aimed at reducing failed upgrades and making recovery from interrupted updates more reliable.
Inside the tool's interface, click the or Check Connection button.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. xtool upgrade tool v2.0.57
Launch the tool, connect a device, and hold Ctrl + Shift + D before clicking “Device Info.” A hidden diagnostics panel appears, showing raw temperature sensor readings from the laser diode case and the number of emergency stop cycles logged. This isn’t documented anywhere—discovered purely by a curious user on r/xTool.
Once the tool displays "Upgrade Successful," turn off your xTool machine, wait 10 seconds, and turn it back on to initialize the new system parameters. Troubleshooting Common Errors in v2.0.57 "Device Not Found" or "Failed to Open COM Port"
Note down your (username) and Password ; you will need these for the upgrade interface. The SD Card Method : Power down the device and remove the TF (SD) card . The v2
: Automatically handles the file structure required for the scanner to read updated data from the memory card. How to Update Your Device To use the upgrade tool correctly, follow these steps: Download and Install : Visit the official xTool Download Center and select the Upgrade Tool v2.0.57 Retrieve Login Credentials
XCS usually prompts you automatically when a new version (e.g., v2.0.x) is available upon opening the software.
Here is a feature design proposal for .
Run the Upgrade Tool v2.0.57. It should automatically detect the SD card. : Input your serial number and password into the tool. Click "Upgrade" and wait for the progress bar to complete.
Connect your xTool machine (D1, D1 Pro, M1) to your computer using the original USB cable. Ensure the machine is turned on. Step 2: Open the Upgrade Tool Launch the . Step 3: Select Your Machine
What (Windows or macOS) is your computer running? This public link is valid for 7 days