Digi Sm 5000 Scale User Manual

Press the key. The weight display will reset to 0.000 , and a "Tare" indicator will appear.

Resets the scale display to exactly 0.000 when the platter is empty but the screen shows a minor weight drift due to debris or air currents.

Push the green locking arm back down until it clicks, anchoring the thermal printhead flush against the paper. Close the outer door. PLU and Preset Programming Guide Digi Sm 100 Scale Manual - MCHIP

To guarantee legal-for-trade weighing accuracy, your scale must sit perfectly level. digi sm 5000 scale user manual

The SM-5000 is more than just a scale; it is an interactive kiosk and labeling station.

Enter the PLU number using the numeric pad and press (or press the dedicated Preset Key ).

Ensure the air bubble in the level indicator is centered. Press the key

The weight on the platter exceeds scale capacity, or the platter support mechanism is binding.

Inspect network cables. Check your router or back-office server connection. Restart the scale.

Locate the spirit level bubble (usually near the platter base). Adjust the four threaded rubber feet until the air bubble sits perfectly inside the inner circle. Push the green locking arm back down until

Place the product onto the center of the stainless steel weighing platter.

The DIGI SM-5000 supports various transaction workflows suited for different retail environments. Standard Weighing and Printing Ensure the scale reads 0.000 . If not, press the key. Place the item on the weighing platter. Enter the PLU number or tap the corresponding Speed Key . Wait for the weight and price to stabilize on screen. Press the PRINT key to generate the label. Using the Tare Function

Before diving into operation, it's helpful to understand the hardware that makes this scale so capable.

The internal printer reaches speeds up to 150mm/second , significantly reducing customer wait times during peak hours.

(Warning: Calibration requires certified test weights to ensure legal compliance for trade.)