Atex 3069 X ((free)) — Lcie 13

: This is a unique identifier for the certification. It could refer to the specific test and certification record number assigned by LCIE.

Since you asked for a "useful feature" looking into this, the most valuable information is decoding what this certification actually allows and limits the equipment to do. This is critical for safety and compliance.

: Explicitly states that the document aligns with the EU ATEX Directive (such as Directive 2014/34/EU ), governing equipment intended for explosive atmospheres.

The suffix is critical. In ATEX terminology, an X after the certificate number indicates “Special conditions for safe use.” The manufacturer must provide specific instructions in the manual. Common X-conditions include:

(Non-sparking apparatus) is a protection concept for equipment used in Zone 2 —areas where an explosive atmosphere is not likely to occur in normal operation and if it does occur, it will exist only for a short period. lcie 13 atex 3069 x

Ignoring these X-conditions invalidates the certification.

Hazardous area safety is a shared responsibility that extends from the design table to the factory floor. Understanding certifications like LCIE 13 ATEX 3069 X is more than an exercise in regulatory compliance. It is fundamental to preventing catastrophic events and protecting lives. Always consult complete certification documentation, follow all specific conditions of use, and when in doubt, contact the certificate holder or Notified Body for clarification.

The "LCIE 13 ATEX 3069 X" certification typically relates to equipment designed with specific protection methods, such as or Increased Safety (Ex e) .

: Develop a feature to integrate these lights into a centralized control system using their 100-240 VAC power versatility. Monitoring Systems : This is a unique identifier for the certification

The at the end of the certificate number is arguably the most important—and most frequently misunderstood—element of the LCIE 13 ATEX 3069 X marking.

By embracing the strictures of certifications like LCIE 13 Atex 3069 X, industries can foster a safer working environment and contribute to the overall goal of minimizing risks in hazardous areas.

The presence of the requires specific operational attention. Unlike standard components, equipment holding an "X" certificate usually dictates one or more of the following conditions: Special Condition Category Typical Engineering Action Required Electrostatic Hazard

The string "LCIE 13 ATEX 3069 X" refers to a specific ATEX (Explosive Atmospheres) certification number issued by LCIE Bureau Veritas , a French notified body for explosion protection The certificate number can be broken down as follows: This is critical for safety and compliance

Understanding ATEX Certification Codes: Deciphering LCIE 13 ATEX 3069 X

: Inspect the original certificate document directly from LCIE Bureau Veritas to explicitly isolate what the "X" flag mandates. Share public link

stands for Laboratoire Central des Industries Électriques (Central Laboratory of the Electrical Industries). Based in France, LCIE is a renowned notified body under the European Union’s ATEX Directive 2014/34/EU (formerly 94/9/EC). Their notified body number is 0081 .

The most useful feature of looking up this code is discovering with the device (the "X" factor). Without checking those specific conditions, you risk creating an ignition source in a hazardous area.