Motorola Gm360 Programming Software Jun 2026

: Configure 5-tone selective signaling, Private Line (PL), and MDC1200.

The software for the GM360 is known as the . Because the GM360 is a legacy model, this software is no longer officially supported or sold on the active Motorola Solutions portal.

Before making any changes, you must pull the existing configuration (known as a Codeplug) from the radio. Turn on the GM360 radio.

is a popular open-source option, but it does not support the Motorola GM360. Similarly, RT Systems , which creates custom programming software for various radios, is not known to directly support the GM360.

If you search forums, you will see old-timers talking about "RSS" (Radio Service Software). motorola gm360 programming software

Used if you are programming via an older computer with native COM ports or through a Motorola RIB (Radio Interface Box). 2. Stable Power Supply

Legacy versions were built for Windows XP, Windows 7, and Windows 8. Running the software on Windows 10 or Windows 11 often requires running the application in Compatibility Mode as an Administrator. Required Hardware and Setup

The GM360 is programmed using the (commonly version R03.xx.xx or later, depending on the radio's firmware region). Because these radios are legacy equipment, the software was originally designed for older operating systems.

Connect the programming cable to your computer's USB/Serial port. Plug the RJ45 connector into the GM360 microphone jack. Power on the radio. Launch the Motorola CPS software. Click (or press the standard read icon). : Configure 5-tone selective signaling, Private Line (PL),

You can assign functions like High/Low Power , Scan On/Off , Monitor , or Public Address (PA) to the programmable keys.

The GM360 features several customizable buttons on the front panel. Navigate to -> Button Configuration .

This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later.

: Always create a "Master" folder on your computer for your codeplugs. Name files by date and purpose (e.g., GM360_Base_Station_2026_06.ctb ) so you can easily revert to a working configuration if a programming session goes wrong. Before making any changes, you must pull the

features programmable buttons. You can set these for quick access to features like high/low power, scan on/off, or emergency alerts.

You cannot download the CPS for free from Motorola. Instead, you need to purchase access through authorized channels. The software is aimed at and can be demanding to use.

Click the icon on the top toolbar, or go to File -> Read Device .