Lovato 31 Rgam 12 User Manual Verified -

Tells the controller the relative size of each capacitor step. How to Calculate the C/k Ratio

| Feature | Specification | | :--- | :--- | | | 12VDC (Operating range: 6.2 to 16.5VDC) | | Mains Control Range | 70 to 624VAC (50 or 60Hz) for single or three-phase | | Physical Dimensions | 144mm x 144mm | | Alarm Log Capacity | Stores last 255 events with date and time stamps | | Remote Comm. | SMS, E-mail via "Autocall" function (with GSM modem) | | Main Functions | Customizable I/Os, Automatic Test, PC-RGAM Software suite |

The back of the RGAM 12 features a series of screw terminals. Accurate wiring is critical to prevent damaging the controller or the generator’s alternator. Basic Terminal Mapping:

Even with a well-designed product like the Lovato 31 RGAM 12, issues can arise. Here’s a quick troubleshooting table based on user manual guidelines and field experience. lovato 31 rgam 12 user manual

Connect these directly to the source side of your main breaker. These sense phases for over/under-voltage spikes, frequency shifts, and phase asymmetry.

Inspect all wiring terminal screws on the back of the unit. Engine vibrations can loosen terminal screws over time; retighten them if necessary.

Integrated monitoring sensors for oil pressure, engine temperature, overspeed, and battery voltage. Tells the controller the relative size of each

If you are using floppy disks: Close all applications. Insert the first disk (1) into drive A : Start the setup program by double- СВ Альтера Lovato RGAM Automatic Transfer Unit Guide | PDF - Scribd

Relay outputs for fuel solenoid, starter motor, and alarm signaling. 3. Installation and Wiring

This comprehensive technical guide serves as a practical manual for electrical engineers, plant technicians, and installers working with the Lovato 31 RGAM 12 controller. 1. Technical Specifications and Hardware Overview Accurate wiring is critical to prevent damaging the

Prevents a capacitor from turning back on before it has safely discharged. Step Configuration User defined (e.g., 1:1:1 or 1:2:4)

The 31 RGAM 12 includes built-in auxiliary contacts:

The interface provides real-time monitoring and status indication: 3-Digit Display

To adapt the 31 RGAM 12 to your specific engine and regional grid parameters, internal potentiometers or dip switches on the rear/side of the housing must be adjusted:

: Can be connected via RS232 or RS485 interfaces for remote monitoring and parameter editing using dedicated software. Key Technical Specifications Dimensions Standard 144x144 mm panel mounting. Event Log