Systec It3 User Manual ((full)) Direct
Connect to either 110–240 V AC or 12–24 V DC, depending on your specific hardware configuration.
The manual warns against setting temperatures above 121°C for open liquid containers, as violent boiling will occur during exhaust.
Place a known weight on the scale to calibrate the span.
Ensure you have selected the correct drying time (minimum 15 minutes for dense loads). Also, do not overload the chamber—the manual specifies maximum fill levels (e.g., 70% for textiles).
Place an empty container on the scale and press the T key. The display will show "Net." Data Entry systec it3 user manual
We have all been there. You inherit a piece of critical lab equipment, or you move benches, and suddenly the thick, spiral-bound has vanished into thin air.
The is an industrial weighing terminal designed for harsh environments, featuring a rugged IP69K stainless steel housing. The user manual and technical documentation for this device cover everything from basic weighing to complex industrial integration like truck scales and filling controllers . Key Documentation Highlights
High-contrast 5-inch color screen for clear readability.
Configuration data corrupted. Re-upload backup or perform full calibration. Power loss or blown internal fuse Connect to either 110–240 V AC or 12–24
Most users think you have to enter service mode to adjust a cycle. You don't.
: Ensure your manual matches the Weight & Measures approval status of your specific hardware version (e.g., OIML R76).
Place an empty container on the scale and press the [->T<-] (Tare) key. The display will change to 0.0 and show a NET indicator.
Register your IT3 on the Systec portal to receive firmware updates and revised manual chapters. The latest manual version 4.2 (released June 2024) includes new guidance on eco-mode cycles and IoT connectivity. Ensure you have selected the correct drying time
: Beyond basic weighing, there are specific manuals or chapters for: TRUCK : Managing first and second weights for truck scales. COUNT : Parts counting with piece weight optimization. FILL : Controlling liquid filling or discharging.
securely on the glands to retain the IP69K fluid-barrier seal. Load Cell Integration
Pressing the key triggers data transmission over RS232, RS485, or Ethernet.