• Accueil
• jis g 3193 pdf
• jis g 3193 pdf

Once you have legally obtained the PDF, integrate it effectively:

Find your nominal size (e.g., "200 x 100"). Read the row: height, flange width, web thickness, corner radii.

The standard applies to a wide range of hot-rolled steel products, including:

Absolutely. Use the PDF to audit the mill certificate. Verify that:

Established by the Japanese Standards Association (JSA) , JIS G 3193 acts as a supplementary standard. Rather than defining the chemical or mechanical properties of a specific steel grade, it dictates the dimensional limits for other material standards.

It was first established to create a unified system for describing the physical geometry of common hot-rolled steel products. Unlike standards that focus on chemical composition (e.g., JIS G 3101) or mechanical properties (e.g., tensile strength), JIS G 3193 focuses exclusively on the that matter to fabricators:

However, I can help you that you could then format into a paper/PDF yourself. Below is a template based on the standard’s known scope.

JIS standards are copyrighted by the Japanese Standards Association (JSA) . Distributing or downloading pirated PDFs is illegal and unethical. Moreover, using an outdated or corrupted copy could lead to engineering failures.

Tolerances differ for "mill edges" (untrimmed) and "cut edges" (trimmed/resheared).

Jis G 3193 is a Japanese Industrial Standard that specifies the requirements for hot-rolled steel plates, sheets, and strips for welded structures. The standard covers various aspects, including the manufacturing process, chemical composition, mechanical properties, and testing methods for these steel products. The Jis G 3193 pdf document provides detailed information on the tolerances, dimensions, and quality control measures for these steel products.

The maximum allowable deviation from a perfectly flat plane when the plate is laid on a flat surface.

The JIS G 3193 standard is copyrighted intellectual property. Obtaining the official document from authorized sources ensures you have the correct, legally usable version.

To find the official , you can search on the Japanese Standards Association (JSA) Webdesk. Search Query: "JIS G 3193:2019"

Applicable only to fixed steel plates and sheets, not coils. Permissible Thickness Tolerances

1.2, 1.6, 2.0, 2.3, 2.5, 3.2, 4.0, 4.5, 5.0, 6.0, 8.0, 10.0, 12.0, up to 50.0+ mm