Deckma Omd11 Manual Extra Quality -

Connect the 4–20 mA terminals to the ship’s official oily water separator (OWS) data logger. 5. System Calibration and Adjustment

By following the guidelines and recommendations outlined in this article and the Deckma OMD11 manual, you'll be well on your way to optimizing your oil-water separator's performance, ensuring a safe and efficient operation, and protecting the environment.

Sensors measure the amount of light scattered by oil droplets in the water.

The outlet piping must fall freely to an open funnel or non-pressurized drain line. Backpressure on the outlet will cause erratic readings or cell leakage. deckma omd11 manual

A central blower draws sample air from the engine through pipes to the measuring head. The contains a strict warning: The blower must create a negative pressure of approximately 200 mm water column. Any leak in the sampling tube results in false low readings.

The unit must be properly grounded to prevent electrical hazards. 3. Operating Instructions (OMD-11 Manual)

Insert the official Deckma cleaning brush into the glass tube. Connect the 4–20 mA terminals to the ship’s

is a globally recognized leader in maritime monitoring technology, and their OMD-11 Oil Mist Detector is a cornerstone of modern engine room safety. Designed to comply with SOLAS regulation II-2/15.2.9, the OMD-11 continuously monitors crankcase atmospheres for explosive oil mists—a critical early warning system against engine blowbacks and crankcase explosions.

If the oil content exceeds 15 ppm, the unit triggers an internal relay. This instantly stops the overboard discharge and diverts the fluids back to the bilge holding tank. 2. Technical Specifications

Pressure: 0.1 to 8 bar; Flow: 0.5 to 4 l/min; Temperature: +1°C to +60°C 3.5 kg; 175 mm (W) x 190 mm (H) x 220 mm (D) 🏗️ System Overview and Operating Principle Sensors measure the amount of light scattered by

:

is a specialized bilge alarm monitor designed to measure oil-in-water concentrations, ensuring maritime vessels comply with International Maritime Organization (IMO) regulations