Ensure your WS-6933 has at least an 80% charge to prevent it from dying mid-update. Step-by-Step Software Update Process
To avoid bricking your device, ensure you have gathered all necessary tools before starting the update process:
The PC cannot talk to the meter's internal processor.
. Files from the WS-6906, WS-6908, or WS-6936 will not work and may damage your device. Conclusion Keeping your Satlink WS-6933
If you only need to update the satellite frequencies rather than the entire firmware: satlink ws-6933 software update
By carefully following this guide and using the available community resources, you can keep your SatLink WS-6933 in top working condition, ensuring accurate and reliable satellite dish alignment for years to come.
The Satlink WS-6933 satellite finder can be updated via its USB port to add new satellite frequencies, fix bugs, or improve signal detection performance Update Process To update the software on your device, follow these steps: Prepare the Files : Download the latest
Wait 2–3 minutes. during the update. The device will reboot automatically.
This public link is valid for 7 days and shares a thread, including any personal information you added. This link or copies made by others cannot be deleted. If you share with third parties, their policies apply. Can’t copy the link right now. Try again later. Ensure your WS-6933 has at least an 80%
Ensure the cable data wires work, as some cheap cables only transfer power.
Look under . If you see a yellow exclamation mark, download and install the corresponding USB-to-Serial driver. Note the assigned COM Port number (e.g., COM3). Step 3: Launch the Upgrade Tool Unzip the downloaded update package on your PC.
| Aspect | Update via USB (Full Database) | Manual Edit (Selective Data) | | :--- | :--- | :--- | | | Full firmware or data list replacement. More complex. | Simple, in-device editing. Very safe. | | Risk Level | Moderate to High. Risk of bricking device if interrupted. | Very Low. No risk to core functions. | | Time Required | Variable, mostly spent finding correct file. | Fast, once you know the parameters to edit. | | Best For | Major overhauls, fixing device bugs, or when many transponders are outdated. | Correcting a few specific frequencies or adding a new transponder for a single channel. |
Are you looking to add a or region to your meter? Files from the WS-6906, WS-6908, or WS-6936 will
: Adds recent transponders and orbital positions.
The progress bar on your PC screen should turn blue or green, indicating data transfer.
: After the update is complete, the meter will typically instruct you to restart it. Turn the device off, remove the USB drive, and then turn it back on.
If you only need to update a few transponder parameters because a specific channel is no longer working, you can manually edit them directly on the device without any update. The WS-6933 has a built-in editor that allows you to: