Chaser Ch-e80 Print Driver Jun 2026
When prompted for the Make/Model, upload the .ppd file included in your driver download, or select . Advanced Driver Settings
The computer is using an incorrect baud rate (for Serial connections) or a corrupted driver file that is not translating ESC/POS commands properly.
| Error Message | Likely Cause | Solution | | :--- | :--- | :--- | | | Corrupted download or missing INF file | Re-download from official source. Disable antivirus temporarily. | | “Device not migrated” (Windows) | Previous driver remnants | Use Print Management Console (printmanagement.msc) to remove all old Ch-e80 instances, then reinstall. | | Printer prints unknown symbols | Wrong driver (e.g., generic/text) | Delete the printer. Reinstall using the exact .inf file. Select “Ch-e80” not “Generic.” | | Jobs stuck in queue | USB cable or port conflict | Try a different USB port. Reset the printer (power cycle). Clear the queue manually. | | Paper size mismatch | Default page size not set | In Printer Properties > Preferences > Paper Size: set to 80mm x 297mm (or your label size). | | Blue light flashing but no print | Out of paper or sensor blocked | Load paper correctly. Clean the paper sensor with compressed air. |
Works adequately for its price point. It’s a generic driver for a generic printer—get it working once, and then never touch the settings again. Chaser Ch-e80 Print Driver
Go to to configure settings such as paper size (80mm x 80mm), cut mode (after document), and print speed. Troubleshooting the Chaser Ch-e80 Driver
Plug the power cable into the CH-E80 and turn the power switch .
To maximize the efficiency of your Chaser CH-E80, you can tweak the internal settings via the driver properties menu: When prompted for the Make/Model, upload the
Chaser printers frequently use standard thermal printer mainboards. If an official Chaser-branded driver is unavailable, a or an Xprinter 80mm Driver (often sharing the same underlying architecture) will successfully operate the device. 3. POS Software Bundles
The Chaser Ch-e80 Print Driver is a reliable and efficient software solution for users of the Chaser Ch-e80 printer. While it may lack some advanced features, the driver delivers high-quality output and is easy to use. Overall, we recommend the Chaser Ch-e80 Print Driver to users seeking a straightforward and effective printing solution.
: It supports NV bitmap downloads (for logos) and black mark orientation for precise ticket alignment. Printer Specifications Feature Print Speed Up to 260mm/s Paper Width 79.5 ± 0.5mm Compatibility Fully compatible with ESC/POS commands Internal Memory Built-in data buffer to receive new tasks while printing Installation Basics To get the printer running, you typically need to: Identify the Port : Connect the printer via USB or LAN. Disable antivirus temporarily
Re-download the official Chaser Ch-e80 driver and ensure you are downloading the 32-bit or 64-bit version that matches your Windows operating system. 5. Maintenance and Best Practices
Complete Guide to the Chaser CH-E80 Printer Driver If you are setting up a professional POS (Point of Sale) system, the is a popular choice for high-speed thermal receipt printing. However, like any hardware, its performance depends entirely on having the correct driver installed.
USB, Serial (RS-232), Ethernet (LAN), or Wi-Fi/Bluetooth (depending on the specific sub-model). Print Speed: Typically ranges between 200mm/s to 260mm/s. Commands Supported: ESC/POS standard command set.
This is almost always a driver density issue. Increase the print darkness to at least 85%. Also, ensure you are not scaling the barcode – print it at native resolution (203 DPI for Ch-e80).
: Open the downloaded driver executable. Choose the "Install Printer Drivers" option. Port Selection