Before diving into the setup, here are the core specifications of the MS-7826:
End of manual for MS 7826 Ver 1.0.
Navigating the board layout is essential when swapping cases, adding storage, or upgrading expansion cards.
> Measure - Ch1 value - Ch2 value - Trend graph > Logging - Start/Stop - Log interval - View files > Setup - Input config - Communication - Display - Date/time > Calibration > System - Info (firmware, serial) - Factory reset - Firmware update ms 7826 ver 1.0 manual
Non-ECC, Unbuffered, 1.5V or 1.35V DDR3. 4. Expansion Slots and Connectivity PCI Express x16: 1 Slot (for a dedicated graphics card).
1x 24-pin ATX main power, 1x 4-pin ATX 12V CPU power 2. Processor (CPU) Support
MS 7826 Ver 1.0 manual, MS 7826, ver 1.0 manual, configuration, error codes, firmware, installation, troubleshooting, legacy hardware, serial terminal setup. Before diving into the setup, here are the
Repeat for Channel 2. Factory reset restores default calibration.
Connect to PC, device appears as mass storage (MS7826_INTERNAL). Copy CSV files.
LGA 1150 (supports 4th and 5th generation Intel Core i3, i5, and i7 processors). 4 DDR3 DIMM slots. Processor (CPU) Support MS 7826 Ver 1
From the factory, your MS-7826 Ver 1.0 likely includes a 4th generation Intel Core "Haswell" processor like the Core i5-4430. However, it is also compatible with the range-topping Intel Core i7-4770K, should you choose to upgrade.
Located at the bottom right of the board. The power switch and LED pins are often identified by fine print on the board itself. Expansion Slots: