Ch-899 Chouchin Radio Controlled Clock Instructions ^new^ Jun 2026

Initial setup (first-time install)

Press the M.SET button repeatedly to move the minute hand forward one minute at a time.

The hands will return to 12:00 and begin searching for a signal again. TLC Electrical Supplies Troubleshooting Tips MSF Radio Controlled Wall Clock - TLC Electrical Supplies

Follow these step-by-step instructions to set up your CH-899 clock for the first time or after a battery change. Step 1: Insert the Battery ch-899 chouchin radio controlled clock instructions

Allow the clock to remain in this position. The movement will begin searching for the radio signal to set the correct time automatically. 3. Automatic Time Setting Procedure

If you cannot receive a radio signal, you can set the time manually:

Once the hands park themselves, the clock enters "Signal Reception Mode." Initial setup (first-time install) Press the M

Complete Guide and Instructions for the CH-899 Chouchin Radio Controlled Clock

A: Many CH-899 movements have a "REC" (Receive) button. Pressing and holding this button for 2-3 seconds forces a new signal search. If your movement lacks this button, removing and re-inserting the battery will also trigger a fresh search for the signal.

The is an ultra-precise, automatic timekeeping mechanism used in premium wall clocks worldwide . Powered by a single 1.5V AA alkaline battery, the CH-899 sets itself automatically by tuning into atomic time transmitters such as the MSF signal in the UK, WWVB in the USA, or JJY/DCF77 depending on regional variants. Step 1: Insert the Battery Allow the clock

Press the [M. SET] button briefly multiple times to advance the minute hand one minute at a time to reach the exact time.

Your current (to determine your atomic signal transmitter).

Here’s what you can do to get the paper manual: