Select the correct (Check your PC's Device Manager to find this). Set the Baud Rate (typically 115200).
Keep the power adapter of your satellite receiver from the wall outlet.
The selected COM port is wrong or in use by another application.
The Sunplus Loader Tool Link offers numerous benefits to developers, engineers, and technicians working with Sunplus technology. Some of the key benefits include: sunplus loader tool link
Here is everything you need to know about the tool and how to download it safely.
The flashing process will begin. A progress bar will show the update's status. Once it reaches 100%, the process is complete. You can then close the loader tool and power cycle your receiver. Your device should now be updated or recovered.
Once it shows or "Complete," turn off the receiver, disconnect the cable, and turn the receiver back on. Troubleshooting & Tips Select the correct (Check your PC's Device Manager
The Sunplus Loader Tool Link offers a range of features that make it an indispensable tool for developers, engineers, and technicians working with Sunplus technology. Some of the key features include:
Fix : The selected COM port is incorrect or currently being used by another program. Check Device Manager and restart the tool.
To use this tool effectively, you generally need the following hardware setup: RS232 Serial Cable The selected COM port is wrong or in
Ensure the operation mode is explicitly toggled to or DDR Only depending on the specific recovery state required.
of your receiver (e.g., 1506G, 1507G) so I can help you find the exact loader version?
Connect your PC to the receiver using the RS232 cable. Keep the receiver powered OFF . Configure the Tool:
: Always run downloaded .zip or .exe files through an antivirus scanner before execution.
: Look for utilities labeled Sunplus_Loader_V1.5 or ConsoleDown_v1.3.3.11 . These are the standard execution programs used to push .bin firmware files.